home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HPAVC
/
HPAVC CD-ROM.iso
/
CELLP.ZIP
/
MOBIRA3.TXT
< prev
next >
Wrap
Text File
|
1993-04-11
|
3KB
|
59 lines
MOBIRA TPA-4/400, THA-5/500
NOTES: All 500 series units are dual NAM.
Some 400 series units are single NAM.
The ESN prefix is 156 decimal, 9C hex.
Mobira: 813-536-5553
PROGRAMING:
1. Turn on power.
2. Go to the special function menu by entering MENU, FCN, NEXT, OK, FCN,
NEXT, OK. (A * should appear in the display).
3. Enter * 2 1 0 5 7 # S S S S S OK (where SSSSS is the security code).
The factory default security code is 12345.
4. The NEXT key is used to scroll through the parameter NAMES.
5. To display and/or change a parameter VALUE press OK.
Parameter values are either NUMERIC, or single option TEXT & 0/1.
For NUMERIC parameters enter the new value and press OK to store.
For TEXT & 0/1 parameters press NEXT to toggle and OK to store.
6. Press FCN CLR and turn off power to exit programing mode.
PROGRAMING DATA:
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
01 PRIMARY/OPTIONAL SELECT NAM USED TOGGLE NAM 1 OR 2
02 DISABLED/ENABLED OPTIONAL NAM TOGGLE NAM 2 ACCESS
03 00000 - 32767 HOME SYS SYSTEM ID
04 0 OR 1 ACCESS M TOGGLE MIN MARK
05 0 OR 1 LOCL OPT TOGGLE LOCAL USE MARK
06 10 DIGITS OWN NUM MIN (AREA CODE & TEL#)
07 2 DIGITS ST CLASS STATION CLASS (ALWAYS 08)
08 0333 OR 0334 PAGING CH INITIAL PAGING CHANNEL
09 2 DIGITS OVERLOAD CLASS ACCESS OVERLOAD CLASS
10 A OR B PREF SYS TOGGLE PREFERRED SYSTEM
11 2 DIGITS GROUP ID GROUP ID (10 IN USA)
12 5 DIGITS SECURITY SECURITY CODE
13 CAN'T BE CHANGED 1 DATE CONTROL DATE
14 MM/DD/YY 2 DATE INSTALLATION DATE
15 MM/DD/YY 3 DATE OPTIONAL CONTROL DATE
(NOT ALL SOFTWARE VERSIONS)
NOTES: Step 01 and 02 will not appear in single NAM units, step 02 must
be enabled to program NAM 2.
The lock code must be changed out of programing mode, enter:
MENU, FCN, NEXT, NEXT, NEXT... (Repeat until display shows "UNLOCK
CODE") OK, SSSSSS, LLLL, OK (where SSSSS is the security code and
LLLL is the new lock code).
LOCK: F 0. UNLOCK: Enter four digit code.
SYSTEM SELECT: FCN 1 then NEXT to scroll, OK to store/exit.